Project Highlight – UCSF Rock Hall Dekker Lab Vac System Replacement

Three large black industrial pumps with exposed piping and wiring installed in a utility room with concrete floors, visible ceiling pipes, and various electrical panels on the walls.

Project: Rock Hall Laboratory Vacuum System Replacement The original specification and basis of design for the (E) Dekker Laboratory Vacuum System: 675 ACFM @ 28”HGVAC = 45 SCFM @ 28”HGVAC Each Vacuum Pump This equates to approx. 250 vacuum inlets.   The typical laboratory design at 25”HGVAC at the vacuum pump inlet, gives approx. 23”HGVAC […]

Project Highlight – Powerex Lab Vacuum and Compressed Air System Installation Project

Two large industrial air compressors with "Powerex" branding are installed on a rooftop under a metal canopy. The units are connected by pipes and surrounded by other rooftop machinery, with a clear blue sky overhead.

AES Group, Inc. recently had the opportunity to work with a great team in supplying two new Powerex Laboratory Vacuum and two new Powerex Laboratory Compressed Air Systems, each with NEMA 3R Control Panels. The AES construction team provided planning for installation and completing the rigging, setting and anchoring of the new equipment, including Mason […]

Infectious Control Compliance and Planning….

A hospital hallway with a door and surrounding wall sealed off by plastic sheeting and tape, labeled "AES GROUP INC." Warning and construction signs are posted, indicating restricted access for medical or construction reasons.

AES Group, Inc. has continued to work hard meeting and setting industry standards for PCRA/ICRA compliance. Partnering with leading Infectious Control Prevention hospital facility teams has allowed us to adopt best practice protocols to identify potential healthcare construction risks and create mitigation strategies to reduce or eliminate them. AES Group understands and is knowledgeable about […]

AES Service Team – Becker Laboratory Vacuum Pump Evaluation

Industrial vacuum pump system with control panel labeled "Becker," featuring buttons, display screen, and electrical components, installed in a metallic, industrial environment with pipes and wiring visible.

Our service team was recently called out to evaluate a Becker Laboratory Vacuum System, that the owner relayed was in need of repair. Upon arrival our technician Danny Yanez, checked all filters, checked piping for signs of leaking and tightened as required. The issue found was with the purge filter and so the sequence was […]

“An ounce of prevention is worth a pound of cure” Benjamin Franklin

A person wearing blue gloves pours liquid from a large gray container into a red funnel attached to industrial piping, in a facility with various metal pipes and equipment.

Maintenance is key for performance and longevity of your equipment and systems. AES Group’s services include planned maintenance programs, repairs/rebuilds, troubleshooting and emergency site visits. Our service reports will also help you keep documentation of your equipment, for easy access of system information and any service or repair completed. (example AES Service Report) We offer […]

0