More Projects
Sutter Roseville “Cart Wash and Ultra Sonic Cleaner” CSPD
December 16, 2021
UC Berkeley Bakar Bioenginuity HUB Laboratory Vacuum System
October 19, 2021
Stanford D&T Mechanical Room Control Air Compressor System Upgrade
September 8, 2021
UC Berkeley Bakar Bioenginuity HUB Laboratory Vacuum System Installation
Industry: Laboratories
Type: Equipment
Description
(N) Dekker Laboratory Vacuum System
Scope of Work
- Design Criteria:
- 115 Lab Vacuum Turrets.
- 30 SCFM @ 25”HGVAC
- Design per ASPE Laboratory Vacuum System Design Guidelines
- 115 Lab Vacuum Turrets.
- AES-Dekker Laboratory Vacuum System Model AES-VMXVFD0303KA2-00-ES
- (2) Dekker Titan single stage 20HP liquid ring vacuum pump skids.
- 83 SCFM @ 25”HGVAC (Each Vacuum Pump)
- System Components Include:
- (2) TEFC Electric motors, 230/460 Volt, 3 Phase, Premium Efficiency.
- (2) Flexible Couplings
- (2) Fabricated Steel Baseplates Mounted on Common Base.
- (2) Patented DX5 Discharge Separator-Reservoirs with 5 Stage Air/Oil Separation, Including Coalescing Filter.
- (2) Seal Fluid Isolation Valves
- (2) Y-Strainers
- (2) Service Liquid Solenoid Valves, 24VDC.
- (2) Separator Drain Valves
- (2) Separator Sight Level Gauges
- (2) Temperature RTD for Discharge Temperature Indication and High Temperature Protection.
- (2) High/Low Oil Level Switches
- (2) Air-Cooled, Heat Exchanger Packages with Main Motor Driven Fan and Fan Guard.
- (2) Inlet Check Valves
- Inlet Manifold Including:
- (2) Inlet Isolation Valves
- (2) Inlet Flex Connectors
- Manifold Piping
- Discharge Manifold Including:
- (2) Individual Pump Drip Legs
- (2) Discharge Check Valves
- (2) Discharge Flex Connectors
- Manifold Piping
- (2) Sets of Hydraulic Hose Seal Fluid Line.
- (3) Inlet Filters-Solberg ST-HV Series 3” (Specification and Data Sheet Attached)
- Activated Carbon Granulate -ACG Media
- Removes Gaseous or Vapor Odors
- Note (1) Inlet Filter Shipped Loose for Field Installation
- Activated Carbon Granulate -ACG Media
- (2) Vacuum Relief Valves
- Vacuum Receiver
- (1) Vertical Vacuum Receiver 200 Gallon.
- (1) Receiver Sight Level Gauge
- (1) Receiver Drain Valve
- (1) Receiver Isolation Valve
- Electrical:
- (1) Duplex ControlDEK Control Panel
- Monitors, measures and displays performance
- Identifies maintenance and fault conditions, prevents downtime, and preserves system quality.
- Standard 460V, 3 Phase, 60Hz (NEMA12, CUL Listed
- Custom PLC with 4.3” Color Touchscreen LCD with integral hour meter
- Across-line Magnetic Vacuum Pump Starter with 3 Phase Overload Protection
- RTD for discharge temperature indication and high temperature protection
- Vacuum On/Off capability with adjustable set points
- Vacuum transducer, for vacuum level indication
- Pressure transducer, for back pressure indication
- 24V Power Supply
- (1) VFD to be on the “Lead” Pump and Provide Alternate “Lead” Programming Logic.
- BacNet and Dry Contacts Included
- (1) Duplex ControlDEK Control Panel
- (2) Dekker Titan single stage 20HP liquid ring vacuum pump skids.
Description
(N) Dekker Laboratory Vacuum System
Scope of Work
- Design Criteria:
- 115 Lab Vacuum Turrets.
- 30 SCFM @ 25”HGVAC
- Design per ASPE Laboratory Vacuum System Design Guidelines
- 115 Lab Vacuum Turrets.
- AES-Dekker Laboratory Vacuum System Model AES-VMXVFD0303KA2-00-ES
- (2) Dekker Titan single stage 20HP liquid ring vacuum pump skids.
- 83 SCFM @ 25”HGVAC (Each Vacuum Pump)
- System Components Include:
- (2) TEFC Electric motors, 230/460 Volt, 3 Phase, Premium Efficiency.
- (2) Flexible Couplings
- (2) Fabricated Steel Baseplates Mounted on Common Base.
- (2) Patented DX5 Discharge Separator-Reservoirs with 5 Stage Air/Oil Separation, Including Coalescing Filter.
- (2) Seal Fluid Isolation Valves
- (2) Y-Strainers
- (2) Service Liquid Solenoid Valves, 24VDC.
- (2) Separator Drain Valves
- (2) Separator Sight Level Gauges
- (2) Temperature RTD for Discharge Temperature Indication and High Temperature Protection.
- (2) High/Low Oil Level Switches
- (2) Air-Cooled, Heat Exchanger Packages with Main Motor Driven Fan and Fan Guard.
- (2) Inlet Check Valves
- Inlet Manifold Including:
- (2) Inlet Isolation Valves
- (2) Inlet Flex Connectors
- Manifold Piping
- Discharge Manifold Including:
- (2) Individual Pump Drip Legs
- (2) Discharge Check Valves
- (2) Discharge Flex Connectors
- Manifold Piping
- (2) Sets of Hydraulic Hose Seal Fluid Line.
- (3) Inlet Filters-Solberg ST-HV Series 3” (Specification and Data Sheet Attached)
- Activated Carbon Granulate -ACG Media
- Removes Gaseous or Vapor Odors
- Note (1) Inlet Filter Shipped Loose for Field Installation
- Activated Carbon Granulate -ACG Media
- (2) Vacuum Relief Valves
- Vacuum Receiver
- (1) Vertical Vacuum Receiver 200 Gallon.
- (1) Receiver Sight Level Gauge
- (1) Receiver Drain Valve
- (1) Receiver Isolation Valve
- Electrical:
- (1) Duplex ControlDEK Control Panel
- Monitors, measures and displays performance
- Identifies maintenance and fault conditions, prevents downtime, and preserves system quality.
- Standard 460V, 3 Phase, 60Hz (NEMA12, CUL Listed
- Custom PLC with 4.3” Color Touchscreen LCD with integral hour meter
- Across-line Magnetic Vacuum Pump Starter with 3 Phase Overload Protection
- RTD for discharge temperature indication and high temperature protection
- Vacuum On/Off capability with adjustable set points
- Vacuum transducer, for vacuum level indication
- Pressure transducer, for back pressure indication
- 24V Power Supply
- (1) VFD to be on the “Lead” Pump and Provide Alternate “Lead” Programming Logic.
- BacNet and Dry Contacts Included
- (1) Duplex ControlDEK Control Panel
- (2) Dekker Titan single stage 20HP liquid ring vacuum pump skids.