More Projects
Sutter Roseville “Cart Wash and Ultra Sonic Cleaner” CSPD
December 16, 2021
UC Berkeley Bakar Bioenginuity HUB Laboratory Vacuum System
October 19, 2021
Stanford D&T Mechanical Room Control Air Compressor System Upgrade
September 8, 2021
Genesis North Tower Laboratory Vacuum System Upgrade
Industry: Laboratories
Type: Equipment
Description
Scope of Work
- (2) Dekker Titan single stage 10HP liquid ring vacuum pump skids.
- Capacity each vacuum pump 46 SCFM @ 21”HGVAC
- Oil is Not used as a lubricant
- System Components Include:
- (2) TEFC Electric motors, 230/460 Volt, 3 Phase, Premium Efficiency.
- (2) Patented DX5 Discharge Separator-Reservoirs with 5 Stage Air/Oil Separation/Coalescing Filter.
- (2) Seal Fluid Isolation Valves
- (2) Y-Strainers
- (2) Seal Fluid Line Check Valves
- (2) Separator Drain Valves
- (2) Separator Sight Level Gauges
- (2) Temperature RTD for Discharge Temperature Indication and High Temperature Protection.
- (2) High/Low Oil Level Switches
- (2) Air-Cooled, Heat Exchanger Packages with Main Motor Driven Fan and Fan Guard.
- (2) Inlet Check Valves
- Inlet Manifold Including:
- (2) Inlet Isolation Valves
- (2) Inlet Flex Connectors
- Manifold Piping
- Discharge Manifold Including:
- (2) Individual Pump Drip Legs
- (2) Discharge Check Valves
- (2) Discharge Flex Connectors
- Manifold Piping
- (2) Sets of Hydraulic Hose Seal Fluid Line.
- (2) Inlet Filters
- (2) Vacuum Relief Valves
- Common Baseplate to include (2) individual skids designed to fit thru 36” door.
- Vacuum Receiver
- (1) Vertical Vacuum Receiver 120 Gallon
- (1) Receiver Isolation Valve
- (1) Receiver Sight Level Gauge
- (1) Receiver Drain Valve
- Electrical:
- (1) Duplex ControlDEK Control Panel
- Monitors, measures and displays performance
- Identifies maintenance and fault conditions, prevents downtime, and preserves system quality.
- Standard 460V, 3 Phase, 60Hz (NEMA12, CUL Listed
- Custom PLC with 4.3” Color Touchscreen LCD with integral hour meter
- Across-line Magnetic Vacuum Pump Starter with 3 Phase Overload Protection
- RTD for discharge temperature indication and high temperature protection
- Vacuum On/Off capability with adjustable set points
- Vacuum transducer, for vacuum level indication
- Pressure transducer, for back pressure indication
- 24V Power Supply
- Dry Contacts for General Fault Alarm
- (1) Duplex ControlDEK Control Panel
- Solberg HV Series Filter UL234/2G-400C
Description
Scope of Work
- (2) Dekker Titan single stage 10HP liquid ring vacuum pump skids.
- Capacity each vacuum pump 46 SCFM @ 21”HGVAC
- Oil is Not used as a lubricant
- System Components Include:
- (2) TEFC Electric motors, 230/460 Volt, 3 Phase, Premium Efficiency.
- (2) Patented DX5 Discharge Separator-Reservoirs with 5 Stage Air/Oil Separation/Coalescing Filter.
- (2) Seal Fluid Isolation Valves
- (2) Y-Strainers
- (2) Seal Fluid Line Check Valves
- (2) Separator Drain Valves
- (2) Separator Sight Level Gauges
- (2) Temperature RTD for Discharge Temperature Indication and High Temperature Protection.
- (2) High/Low Oil Level Switches
- (2) Air-Cooled, Heat Exchanger Packages with Main Motor Driven Fan and Fan Guard.
- (2) Inlet Check Valves
- Inlet Manifold Including:
- (2) Inlet Isolation Valves
- (2) Inlet Flex Connectors
- Manifold Piping
- Discharge Manifold Including:
- (2) Individual Pump Drip Legs
- (2) Discharge Check Valves
- (2) Discharge Flex Connectors
- Manifold Piping
- (2) Sets of Hydraulic Hose Seal Fluid Line.
- (2) Inlet Filters
- (2) Vacuum Relief Valves
- Common Baseplate to include (2) individual skids designed to fit thru 36” door.
- Vacuum Receiver
- (1) Vertical Vacuum Receiver 120 Gallon
- (1) Receiver Isolation Valve
- (1) Receiver Sight Level Gauge
- (1) Receiver Drain Valve
- Electrical:
- (1) Duplex ControlDEK Control Panel
- Monitors, measures and displays performance
- Identifies maintenance and fault conditions, prevents downtime, and preserves system quality.
- Standard 460V, 3 Phase, 60Hz (NEMA12, CUL Listed
- Custom PLC with 4.3” Color Touchscreen LCD with integral hour meter
- Across-line Magnetic Vacuum Pump Starter with 3 Phase Overload Protection
- RTD for discharge temperature indication and high temperature protection
- Vacuum On/Off capability with adjustable set points
- Vacuum transducer, for vacuum level indication
- Pressure transducer, for back pressure indication
- 24V Power Supply
- Dry Contacts for General Fault Alarm
- (1) Duplex ControlDEK Control Panel
- Solberg HV Series Filter UL234/2G-400C